IMC-1210 vishay dale www.vishay.com 56 document number 34043 revision 10-sep-02 for technical questions, contact magnetics@vishay .com surface mount, molded inductor features ? printed marking. ? compatible with vapor phase and infrared reflow soldering. ? molded construction provides superior strength and moisture resistance. ? tape and reel packaging for automatic handling, 2000/ reel, eia 481. dimensions in inches [millimeters] ?vishay dale ?inductance value ?date code description part marking IMC-1210 model 10% inductance tolerance 10 h inductance value *recommended spacing between components. self- resonant freq. min. (mhz) q min. tol. 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% standard electrical specifications test freq. l & q (mhz) rated* dc current (ma) dcr max. (ohms) ind. ( h) 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 *rated dc current based on the maximum temperature rise, not to exceed 40 c at + 85 c ambient. test equipment ? h/p 4342a q meter with vishay dale test fixture or equivalent. ? h/p 4191a rf impedance analyzer (for srf measurements). ? wheatstone bridge. electrical specifications inductance range: 0.01 h to 220 h. inductance tolerance: 20% for .01 h to 0.82 h. 10% for 1.0 h to 220 h standard. special tolerances available. temperature range: - 55 c to + 125 c. coilform material: non-magnetic for .01 h to 0.10 h. powdered iron for 0.12 h to 100 h. ferrite for 120 h through 220 h. 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 20 15 15 15 15 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 1000.0 1000.0 1000.0 1000.0 1000.0 1000.0 1000.0 1000.0 1000.0 1000.0 1000.0 900.0 700.0 500.0 450.0 400.0 350.0 320.0 300.0 250.0 220.0 180.0 160.0 140.0 120.0 100.0 85.0 80.0 75.0 70.0 60.0 55.0 50.0 45.0 40.0 38.0 33.0 30.0 21.0 20.0 19.0 18.0 16.0 15.0 14.0 12.0 11.0 10.0 9.0 8.0 6.5 6.0 6.0 0.13 0.14 0.16 0.18 0.20 0.22 0.24 0.27 0.30 0.33 0.36 0.40 0.44 0.22 0.25 0.28 0.32 0.36 0.40 0.45 0.50 0.55 0.60 0.67 0.70 0.75 0.85 0.90 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.1 2.5 2.8 3.3 3.7 5.0 6.0 7.0 9.0 10.0 11.0 12.0 14.0 11.0 15.0 17.0 21.0 734 707 661 624 592 564 540 530 483 470 450 450 450 584 548 518 484 456 453 450 450 450 450 450 400 390 370 350 320 290 260 250 224 217 204 194 189 173 164 151 145 122 112 104 91 87 83 79 73 70 65 60 50 0.126 0.008 [3.20 0.203] 0.087 0.008 [2.21 0.203] 0.039 [1.0] 0.020* [0.5] 0.118 [3.0] 0.070 [1.8] 0.138 [3.5] 0.073 [1.85] ref. 0.028 0.004 [0.711 0.102] typ. 0.040 [1.02] 0.098 0.008 [2.49 0.203] 0.030 [0.762] typ. 0.006 [0.152] ref. typ. guidelines for parallel component printed circuit mounting pads on IMC-1210 chip inductors sap part numbering guidelines (internal) product family size see the end of this data book for conversion tables inductance value package code tol. im c 1 210 sy 10 0 k
|
